12
13
CAM-HANK handle
Find the centre of the draw and drill a
starter hole through the front face using
2.5mm drill bit. Drill again using a 5mm
drill bit.
Attach the handle using the longer
(40mm) screw provided.
Note:
Make sure your drill is set at
exactly 90 degrees to the door’s surface.
CAM-HAN12L & CAM-HAN12R handles
Line up the handle on the drawer
making sure the edges are flush with the
top of the drawer, mark the holes.
Drill pilot holes and screw on the handle
using the screws provided.
CAM-HANB handle
Find the centre of the draw and line up
the handle horizontally, mark the screw
points and drill a starter holes through
each mark on the front face using
2.5mm drill bit. Drill again using a 5mm
drill bit.
Attach the handle using the longer
(40mm) screws provided.
Note:
Make sure your drill is set at
exactly 90 degrees to the door’s surface.
The coating on this product is finished to the highest standard. Due care needs to be
taken to ensure the appearance is retained.
We recommend cleaning all products with a soft damp cloth ONLY and advise strongly
against the use of all aggressive/corrosive cleaning products i.e. powders and liquids. If
these instructions are not followed, this may invalidate your guarantee in the event of a
problem occurring.
Note:
Bathroom furniture will deteriorate through extended exposure to elevated
levels of condensation. To mitigate this, it is imperative that bathrooms are equipped
with an appropriate ventilation system, such as an extractor fan.
Each draw has a weight limit of 20kg.
2.5mm drill
2.5mm drill
5mm drill
5mm drill
For illustration purposes only
the drawer front is shown
For illustration purposes only
the drawer front is shown
Middle of unit