8
9
Solid Walls -
Drill Ø 8mm holes into the wall through the holes in the braces,
insert a wall plug, washer and screw through each hole. Place the adhesive sticker
over the hole.
Partition walls -
Screw directly into the studs without using the wall plugs.
Apply a non-acidic silicone along the top
edge of the unit and carefully position the
countertop ensuring that it is flush with
the sides of the vanity unit.
Fix basin by applying silicone on the outer
edge of the basin.
Apply a bead of silicone along the back
and sides of the countertop.
Allow to set fully.
If required, the vanity can also be �xed in the position shown below.
4 holes also on bottom brace
4 holes in top brace
Cover sticker
Screw
Washer
Wall plug