Vaderstad Cultus Series, Инструкция по эксплуатации

Страница: 31 / 42

CS 300-400
11.07.2011
ver.3 31
4 Service and maintenance
Figure 4.1
4.1 Securing implement during service, hydraulically
mounted
! Never stand under the implement if it is only secured with the tractor’s three-point lift!
1 Raise the machine in the lifting arms.
2 Secure the implement as far back as possible using two trestles (B) that are adapted for the
weight, and ensure that the surface is stable. Note that you should not lift the machine higher
above the ground than necessary.
3 Switch off the tractor and apply the parking brake.
Figure 4.2
4.2 Securing implement during service, trailed
! Never stand under the implement if it is only secured with the tractor’s three-point lift!
1 Press down the compaction roller fully.
2 Install all the supplied clips (A) on the ram rod.
3 Lower the implement to the ground and depressurise the hydraulics.
4 Secure the front part of the implement with a trestle (B) adapted for the weight, and ensure that
the surface is stable.
5 Switch off the tractor and apply the parking brake.
B
A
B