WallVIEW CCU HD-20 HD-SDI
WallVIEW CCU HD-20 HD-SDI Manual 342-0182 Rev. A
Page 3 of 24
WallVIEW CCU HD-20 HD-SDI Overview:
The WallVIEW CCU HD-20 HD camera, Quick-Connect CCU and HD-
SDI Slot Card delivers a system that allows for easy installation and
integration. The HD-20 camera is built around a 6.49mm diagonal (1/2.8
Type) high-speed CMOS image sensor with a total of 3.27M pixels and a
20x optical zoom lens, making it the ideal choice for a wide range of HD
video applications.
The camera module is built around a new, high speed CMOS image
sensor with an increased pixel aperture size, high frame rate and high
signal to noise ratio. It also uses the column-parallel A/D conversion
method which, results in increased resolution, saturation and sensitivity
of the sensor. The HD-20 achieves improved picture quality even in low
light environments requiring a minimum illumination of just 1.6 LUX.
The 11-element 20x optical zoom lens with HiLD™ (High Index Low Dispersion) Glass allows WallVIEW HD-20 to
capture a wide angle of view (55.2° wide end) enough to view everyone at a conference room table, as well as
capture an individual from a long distance (2.9° tele end).
Vaddio’s Quick-Connect CCU Power and Control Interface and EZIM HD-SDI Slot Card are part of this system.
The CCU provides power and control to the HD-20 camera up to 500 feet over two (2) Cat-5e cables. The CCU
allows users to control a variety of image controls built into the camera, including iris, red and blue gain, pedestal,
knee, gamma, chroma and gain. The HD-SDI signal is returned over a single coax cable from the HD-SDI Slot
Card. To summarize, the wiring out to this camera system is two (2) Cat-5e 5e cables and one coax.
The WallVIEW CCU HD-20 is an exceptional camera for a wide range of HD video applications such as houses of
worship, corporate boardrooms, live events and distance-learning.
Intended Use:
Before operating the device, please read the entire manual thoroughly. The system was designed, built and
tested for use indoors, and with the provided power supply and cabling. The use of a power supply other than the
one provided or outdoor operation has not been tested and could damage the device and/or create a potentially
unsafe operating condition.
Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or damaged.
In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock,
do not immerse in water or other liquids and avoid extremely humid conditions.
Save These Instructions:
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com
free of charge.
Use only the power supply provided with the system. Use of any
unauthorized power supply will void any and all warranties.
Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not
work well for professional installations and can be the cause of intermittent connections which
can result in the RS-232 control line failing and locking up, and/or compromising the HSDS™
signals. For best results please use standard RJ-45 connectors and test all cables for proper
pin-outs prior to use and connection to Vaddio product.
