Optional Drop-Down Mount for RoboTRAK
Toll Free: 1-800-572-2011, Main: 763-917-4400, FAX: 763-971-4464, vaddio.com
©2016 Vaddio - All Rights Reserved Reproduction in whole or in part without written permission is prohibited. Specifications are subject to change without notice or obligation.
Vaddio, RoboTrak and RoboSHOT are a trademarks of Vaddio. All other trademarks are property of their respective owners. Document Number 342-xxxx RevA, SD: 70241.5
INSTALLING THE MOUNT AND CAMERA:
The Drop-Down Series of camera mounts can be mounted to either 2 x 2’ or
2’ x 4’ ceiling tiles, or a drywall ceiling. When locating the camera, consider
viewing angles, lighting conditions, line of site obstructions and check for
vibration where the camera is to be mounted. Pick a location to optimize the
performance of the camera.
The integrator is responsible for following building codes, determining the
suitability of the suspended or drywall ceiling to carry the load of the camera
and mount, as well as making sure that the camera is secured to the camera
platform properly.
To the right, a diagram is provided for your information and visualization
pleasure. The mounting system should go together as depicted.
INTENDED USE:
These products were designed, built and tested for use indoors and to support the
weight, size and shape of the prescribed products only. Using these mounts for
any other devices could damage that device and/or create potentially unsafe
operating conditions.
SAVE THESE INSTRUCTIONS:
The information contained in this manual will help
you install and operate your product. If these instructions are misplaced, Vaddio
keeps copies of Specifications, Installation and User Guides and most pertinent
product drawings for the Vaddio product line on the Vaddio website. These
documents can be downloaded from
HARDWARE WARRANTY:
Please see the Vaddio website at
Warranty for all Vaddio Products. The Statement of Warranty covers the policies
and procedures of the Hardware Warranty, Exclusions, Customer Service,
Technical Support, Return Material Authorizations (RMA), Voided Warranty,
Shipping and Handling and Products Not Under Warranty. The Vaddio Warranty
Statement supercedes all other published warranty statements in content and
coverages. Vaddio Technical Support can be contacted through the Vaddio
website or through e-mail support at
SPECIFIC EXCLUSIONS:
The Drop-Down Offset Mount for the RoboTRAK system is optional. The RoboTRAK
system is not included. The double decker mount is included with the RoboTRAK
system as a wall mount and is not included with the Drop-Down Offset Mount. If
there is any questions regarding what’s included please look at the manuals or
contact Vaddio Tech Support.
RoboSHOT
Camera
RoboTRAK
IR Camera
Ceiling Tile
Double Decker RoboTrak Mount
(Ships with RoboTRAK System)
Tile Brace
Jamb Nut
Fastener Nut
Large 5” Washer
Mounting
Flange
Offset
Pipe
