ProductionVIEW Super Joystick
ProductionVIEW Super Joystick Manual 341-565 Rev. B
Page 6 of 16
First Time Set-up with the ProductionVIEW Super Joystick:
ProductionVIEW Super Joystick was designed to be exceptionally easy to use and operate right out of the
box. The controls are intuitive and logical and the pin-outs are printed on the back panel.
Getting Started:
To start using the ProductionVIEW Super Joystick, connect the RS-232 Camera Control Ports on the
Super Joystick to the RS-232 inputs on the cameras, turn on the cameras and let them home, then turn
on the Super Joystick. The Super Joystick will scan each of the cameras connected and automatically
load the appropriate RS-232 codes for control of each camera. Any mix of up to six (6) compatible
camera systems can be used concurrently on the system (see Figures 4 and 5). In all cases, video would
be routed to an external switcher/mixer.
Power
Supply
WallVIEW
50i PTZ
WallVIEW
100 PTZ
WallVIEW
70 PTZ
WallVIEW 300 PTZ
WallVIEW HD1
Figure 4:
Basic System Configuration - Standard Definition Video
•
Cameras are controlled by the Super Joystick
•
Video is handled by an external video switcher
•
External Switcher is controlled by the Super Joystick via closures
ProductionVIEW
Super Joystick
RS-232
RS-232
RS-232
RS-232
RS-232
RS-232
WallVIEW 50i
HideAway PTZ
Extron SW Series Switcher
Contact
Closures
Video
Video &
Power
Video
Quick-Connect PRO
QC
QC
QC
QC
QC
Video &
Power
Video &
Power
Video &
Power
Video &
Power
Video &
Power
