VADDIO PRODUCTIONVIEW HD MV, Инструкция по установке и эксплуатации

Страница: 23 / 36

ProductionVIEW HD MV
ProductionVIEW HD MV Manual - Document Number 342-0241 Rev G Page 23 of 36
Cam Search Menu
>Select
>All Ports: (select search method – Auto, Sony, Canon, Panasonic)
>Port 01: (select search method – Auto, Sony, Canon, Panasonic)
>Port 02: (select search method – Auto, Sony, Canon, Panasonic)
>Port 03: (select search method – Auto, Sony, Canon, Panasonic)
>Port 04: (select search method – Auto, Sony, Canon, Panasonic)
>Port 05: (select search method – Auto, Sony, Canon, Panasonic)
>Port 06: (select search method – Auto, Sony, Canon, Panasonic)
NOTE: When using the Panasonic HE-100 cameras, it is required to select Panasonic.
CCU Mode
>Select
>All Ports: (Select method – Direct Cam Ctrl or CCU)
>Port 01: (Select method – Direct Cam Ctrl or CCU)
>Port 02: (Select method – Direct Cam Ctrl or CCU)
>Port 03: (Select method – Direct Cam Ctrl or CCU)
>Port 04: (Select method – Direct Cam Ctrl or CCU)
>Port 05: (Select method – Direct Cam Ctrl or CCU)
>Port 06: (Select method – Direct Cam Ctrl or CCU)
NOTE: When Vaddio Quick-Connect CCUs are used with ProductionVIEW HD MV, the CCU mode disables Iris
functions, AWB and BLC on the ProductionVIEW HD MV console, allowing the user to control these functions from the
Quick-Connect CCU only.
System Menu
>Select
>Serial Input
>Select
>On or Off
Turns on or off serial input (default is on)
>Serial Echo
>Select
>On or Off
Turns Serial Echo on or off (default is on)
>Serial Info
>Select
>On or Off
Non-supported function. For future engineering use only.
>Panel Lights
>Select
>00
through 50
Panel Light Brightness (all lights - 50 is the brightest) (default is 25, off is 00)
>Clear Memory
>Select
>Start
Clears the camera preset memories and sets all parameters to default settings
>Clear Presets
>Select
>Start
Clears the camera preset memory only
>Power Up Preset
>Select
>Home
Camera
>Select - Upon power up, all cameras will go to their home position
>Preset 12
> Select - Upon power up, all cameras will go to Preset 12
>Preset Location
>Local
>6 InCam 6 Local (for Sony cameras only)
In “Local” mode, the ProductionVIEW stores all 12 presets internally
In “6 InCam 6 Local” mode, the presets 1 through 6 will be stored in the cameras.
Presets 7 through 12 will be stored in the ProductionVIEW.
Note: The “6 InCam 6 Local” mode allows for switching video sources when cameras are moving to preset
locations. Since Presets are stored in Camera, the system does not have to wait for position feedback before
allowing another command to be entered.