Mounting the HuddleSHOT Camera
For information about mounting the HuddleSHOT FC camera, refer to the documentation for the product in
which it is housed.
This section covers:
n
Installing the wall mount for the HuddleSHOT camera
n
Mounting the HuddleSHOT camera
n
Other mounting options
Installing the HuddleSHOT Wall Mount
The HuddleSHOT camera is shipped with a wall mount. Other mounting options are available as well.
Contact us if you don’t have the camera mount you need.
You can install the camera wall mount to a 2-gang wall box or directly to the drywall.
n
If you mount it to drywall, use the wall anchors provided with the wall mount.
n
If you mount it to a wall box, use the cover plate screws supplied with the wall box.
Installing the HuddleSHOT Camera on the Wall Mount
Caution
If installing a TableMIC microphone with the camera, be sure you can identify the cables correctly.
Connecting a cable to the wrong port can result in equipment damage and void the warranty.
1. Route the cables through the opening in the mounting shelf and connect them to the camera.
2. Place the camera on the mount.
3. Attach the camera to the mount using the mounting screws supplied with the camera, but do not fully
tighten the screws.
Do not tighten the screws securing the camera to the wall mount until you are able to access the camera's
web interface. You will need access to the button on the back of the camera to pair the remote and camera
or to display the camera's IP address in the USB stream.
7
Installation Guide for the HuddleSHOT All-in-One Conferencing Camera
