EasyTalk Wireless Mic
EasyTalk Wireless USB Mic System - Document Number 342-0442 Rev A
Page 3 of 16
Overview:
The EasyTalk Wireless USB Mic System
expands audio capabilities for live voice
reinforcement with its analog outputs or lecture
capture with its USB 2.0 digital audio output
plugged directly into a computer. Key features of
the EasyTalk Wireless Audio Interface include:
HD Wireless Link with Adaptive Frequency Hopping (AFH) for interference free operation.
USB Audio Output allowing connection to a PC for UC Soft-client Applications or Lecture Capture systems.
Rechargeable Belt Pack transmitter that features a lithium-ion battery pack for extended hours of operation.
The system consists of a Belt Pack Transmitter, Lavalier Microphone and Wireless Receiver. The EasyTalk
Wireless Receiver works in conjunction with the Belt Pack Transmitter and Lavalier Mic worn by the presenter to
send the presenter’s speech to the room’s audio reinforcement, system conferencing system or lecture recording
software. The wireless link uses Adaptive Frequency Hopping (AFH) technology supporting the transmission of
full bandwidth audio digitally to the receiver.
The receiver has a balanced or unbalanced line level output for connection to an amplifier, videoconferencing
codec or other room A/V equipment. In addition, the receiver has a USB audio output that can be directly
connected to a PC emulating a microphone and speaker device for use with Unified Communication clients such
as Skype®, Jabber®, Microsoft Lync® or Lecture Capture Systems like Panopto®, Tegrity® and others. Both the
USB audio and the analog audio can be used simultaneously. Front panel controls allow the user to mute or
adjust output volume level. The back-panel GPIO is used for volume and mute functions that can be wired to
external control systems.
The Belt Pack houses the 2.4 GHZ frequency hopping radio capable of transmitting full spectrum audio (20HZ to
20KHZ). Advanced radio protocols such as adaptive frequency hopping and forward error correction ensures
reliable communication and coexistence with other devices in the band. The Belt Pack includes a rechargeable
lithium-ion battery pack allowing extended operations. Charging is accomplished with a micro-USB power supply
or by simply plugging it directly into a USB port on a PC.
The EasyTalk Wireless USB Mic System incorporates user selectable digital signal processing (DSP) functions to
meet application requirements associated with the room. Functions include Automatic Gain Control, Speaker
Equalization, Compressor, and Microphone Filtering. Collectively, the EasyTalk Wireless USB Mic System adds
pristine sound quality to any audio or recording system.
Intended Use:
Before operating the device, please read the entire manual thoroughly. The system was designed, built and
tested for use indoors, and with the provided power supply and cabling. The use of a power supply other than the
one provided or outdoor operation has not been tested and could damage the device and/or create a potentially
unsafe operating condition
Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or damaged.
In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock,
do not immerse in water or other liquids and avoid extremely humid conditions.
Save These Instructions:
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com
free of charge.
Use only the power supply provided with the system. Use of any unauthorized power
supply or extending the DC side of the power supplies will void any and all warranties.
