Vaddio DomeVIEW Indoor Pendant Mount Dome Installation and User Guide - Document 341-444 Rev. C
Page 8 of 12
CABLING REQUIREMENTS
For the DomeVIEW 70 and 50iR Indoor Pendant Dome that uses the EZCamera Cabling system, the cabling
requirements are as follows:
One (1) - Cat. 5 Cable for Power/Video
One (1) - Cat. 5 Cable for RS-232 control input
One (1) - Cat 5 Cable for RS-232 control output for daisy chaining
For the Indoor Pendant Mount Dome Enclosures that do not use the EZCamera Cabling system, the native
connections on the cameras and original power supply must be used. Custom cables for Power (12 VDC,
video (S-video or composite video) and control signaling must be fabricated.
Note: The RS-232 requires at least 5 wires – preferably paired for TXD and RXD as well as DTR/DSR for Sony control daisy
chain and CTS/RTS for Canon control daisy chain. The native control connections of the Sony EVI-D70 uses the 8-pin mini-din
female connector for RS-232 in and RS-232 out, and the Canon uses a proprietary 20-pin connector and also has an adapter
available to convert the 20-pins into 8-pin mini-din although it is pin differently than the Sony 8-pin mini-din. Please see power
supply cable extension disclaimer above.
GENERAL SPECIFICATIONS
Mechanical:
Pendant Housing:
Steel construction with black powder-coat finish with high-impact, white plastic
styrene shroud; Meets UBC 4305-A
Dome:
Optical-grade
polycarbonate
Trim Ring:
White ABS plastic
Weight:
Dome only 5.4lbs (2.45Kg)
Environment:
Indoor
Only
Optional Accessories:
998-9300-000 Curved Wall Mount
998-9300-001 Curved Wall Mount and Pole Mount Kit
998-9300-002 Ceiling Pendant Mount
451-2000-024 PowerRite 24 VDC power supply
Note: see page 6 for cabling distances with standard and optional power supplies.
