DomeVIEW HD - 12” Indoor Flush Mount Dome
DomeVIEW HD - 12” Indoor Flush Mount Dome Manual 342-0186 Rev. B
Page 4 of 8
Unpacking:
Unpack and identify the following parts for 998-9000-200
DomeVIEW HD - 12” Indoor Flush Mount Dome Enclosure Package includes:
One (1) Dome Enclosure Assembly with the following parts:
One (1) Metal Back Can
One (1) Universal Camera Platform
One(1) ¾” Clamp Down (Romex) Conduit Connector
One (1) Safety Hanger Bracket (fits on conduit connector)
Three (3) 2.5”, 10-32 Threaded F to F .5” Hex Stand-offs (supports the camera platform for HD-18 & HD-19)
Three (3) .75” Long 10-32 Threaded M to F .5” Hex Stand-off Extensions (for HD-20, HD-22, HD-30 and HD-
USB cameras using the 2.5” stand-offs with the .75” stand-off extensions)
Three (3) 4.0” Long 10-32 Threaded F to F .5” Hex Stand-offs (supports the camera platform for RoboSHOT)
Three (3) 10-32 x .5” Pan Head Screws (to attach the camera platform to the stand-offs)
Six (6) #10 Flat Washers(spacers to keep stand-offs plumb)
Two ¼”-20 x 5/8” Screws (attach HD-18 and HD-19 camera to the platform)
Two ¼”-20 x .3/8” Screws (attach HD-19SE, 20/22/30/USB and RoboSHOT camera to platform - Do not use
5/8” screws on HD-19SE, 20/22/30/USB and RoboSHOT)
One (1) Spin-formed White Trim Ring
Two (2) Two white screws for Trim Ring
One (1) One-Piece Heavy Duty Tile Support Brace
Four (4) 10-32 x 1” Pan Head Screws
attach Metal Back Can to Tile Support Brace
12” Optical-Grade Clear Dome with Three (3) Stainless Steel Screws Attached
Other things that are needed for system completion:
One (1) Vaddio HD PTZ Camera Package
Note:
The 12” Smoke Tinted Dome can be purchased as an accessory for use indoors.
Conveniently Located Accessory Section:
998-9000-210:
12” (304.5mm) Clear Dome Accessory
Includes Clear Dome with Stainless Steel Screws
998-9000-220:
12” (304.5mm) Smoke Tinted Dome Accessory
Includes Smoke Tinted Dome with Stainless Steel Screws
Image:
Flush Mount Dome with RoboSHOT 12
