DomeVIEW HD - 12” Indoor Flush Mount Dome
DomeVIEW HD - 12” Indoor Flush Mount Dome Manual 342-0186 Rev. B
Page 3 of 8
Anatomy of the 12” Indoor Flush Mount Dome
The DomeVIEW HD Indoor Pendant Mount Dome Enclosure will come partially assembled
*
.
Two ¼”-20 x 5/8” screws attach HD-18/9to platform
Two ¼”-20 x 3/8” screws attach HD-19SE/20/22/30/USB to platform
One-Piece Tile Support Brace
Clamp Down (Romex) 3/4”Conduit Connector
*
Safety Hanger Bracket
*
Metal Back Can - Three (3) 10-32 x .5” studs hold the
six (6) spacer washers and the three (3) 2.5” stand-
offs
*
¾” Conduit Nut
*
Stand-offs:
Three (3) 2.5” long 10-32 threaded F to F, 0.5” Hex stand-offs support the camera
platform
*
for HD-18 & HD-19 Cameras
Three (3) 0.75” long 10-32 threaded M to F, 0.5” Hex stand-off extensions, add to
2.5” stand-offs for use with HD-18SE/20/22/30 & HD-USB
Cameras Only
Three (3) 4.0” long 10-32 threaded F to F, 0.5” Hex stand-offs. Use only the 4.0”
stand-offs for RoboSHOT Cameras
Universal
Camera
Platform
*
Three (3) 10-32 x .5” Pan Head Screws
attach through the camera platform to the
2.5” stand-offs
*
Vaddio HD-20, HD-19 or HD-18 PTZ
Camera Systems
12” Clear Optical-Grade Polycarbonate
Dome with three (3) stainless steel
screws attached
*
These parts are pre-assembled.
Not Assembled
Not
Assembled
Four (4) 10-32 x 1” Pan Head Screws
attach
Metal Back Can to the Tile Support Brace
Six (6) Spacer Washers
*
White Spin-formed Trim Ring
and White Screws
