VADDIO AV Bridge, Руководство пользователя

Страница: 24 / 36

AV Bridge
Vaddio AV Bridge - Document Number 342-0518 Rev C Page 24 of 36
The DE-15 video port will accept either RGBHV or YPbPr video formats.
Appendix 2: Vaddio Serial Command API
The Vaddio Serial Command protocol is a high level text based command line interface supported on the RS-232
port or via telnet session on the AV Bridge.
Format:
The AV Bridge command application protocol interface is intended to allow external device such as AMX and
Crestron to control the device. The protocol is based upon ASCII format following the VT100 terminal emulation
standard and utilizes an intuitive textual command nomenclature for ease of use. The API is supported on both
the RS-232 and Ethernet physical layers. All ASCII characters will be
echoed
to terminal program and appended
with VT100 string -
ESC[J
(HEX- 1B 5B 4A). Vaddio Command lines are terminated on carriage return. After the
carriage return, the VT100 appends with –
ESC[J
.
(Note that most terminal programs automatically strip the VT100 string.)
General format usage follows a get/set structure. Usage examples for each type are:
Set Example:
COMMAND: > audio mute on
RESPONSE: >OK
Get Example:
COMMAND: > audio mute get
RESPONSE: > audio mute on
Syntax Error Example:
COMMAND: > audio mute on
RESPONSE: > Syntax error: Unknown or incomplete command
Additional programming controls associated with the terminal protocol includes:

CTRL 5
- Clears the current serial buffer on the device.
RS-232 Format:
The RS-232 command format is based communication interface of:
 Start Bit: 1
 Stop Bit: 1
 Data: 8
 Polarity: None
 Flow Control: None
 Baud Rate: User selectable between 9600, 19,200, 38,400
(Default is 38,400 bps)
Telnet Format:
The AV Bridge also supports the API over a network
connection with a Telnet sessions. Telnet sessions will require access
verification and utilizes the same username and password associated
with the Administrator account on the embedded web server. The
default Telnet Port is 23. Command lines are terminated with carriage
return. A complete list of API commands supported by the AV Bridge is
described in the next section heretofore.
Pin RGBHV YPbPr
1 Red Pr
2 Green Y
3 Blue Pb
4 - -
5 N/C N/C -
6 Red GND Pr GND
7 Green GND Y GND
8 Blue GND Pb GND
9 No Pin -
10 GND GND
11 - -
12 - -
13 H-Sync -
14 V-Sync -
15 N/C N/C
Image: Scintillating
example of simulated
Telnet session