VADDIO 999-6925-000 Скачать руководство пользователя страница 8

REVEAL IN-Wall Cameras 

 

REVEAL IN-Wall Camera Manual Document Number 342-0059 Rev. A 

               Page 8 of 28 

Step 6: 

The REVEAL System uses two (2) Cat. 5e cables.  One Cat. 5e cable will to power the camera and return HSDS video 
signals, and the 2

nd

 Cat. 5e cable will handle the RS-232 control signals.  Please TEST and label the POWER/VIDEO and 

the CONTROL cables accordingly.   
 
On the bottom of the camera, remove the Pan 
locking screw as indicated on the right.  The 
purpose of the screw is to hold down the 
pan/tilt mechanism securely during shipment.  
Please do not connect power to the REVEAL 
before removing the screw 
 
 
 
 
 
Route two (2) labeled Cat. 5e cables into the wall cavity and through the opening in the drywall.  Plug the POWER/VIDEO 
cable into the RJ-45 jack marked EZCAMERA POWER & HD VIDEO and plug the CONTROL RJ-45 into the RS-232 & IR 
OUT jack (see below).  At the Quick-Connect system, connect the corresponding Cat. 5e cables to the POWER & HD 
VIDEO port and the RS-232 OUT port.  Please do not cross-connect these cables, instead please label the cables and 
avoid the “trial and error” connection technique.  

TEST THE CAMERA AT THIS POINT TO ENSURE THE REVEAL WORKS 

PROPERLY

. (Refer to the Switch Settings section for HD video output resolutions and dip switch settings on page 11). 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Step 7:  

Ease the Camera Module back into the wall opening with the connected Cat. 5e cables as illustrated below:

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

EZCAMERA 
POWER & 
HD VIDEO 

RS-232 & 
IR OUT 

Tilt the enclosure and 
allow the connectors 
to enter the wall 
opening before the 
bottom of the 
enclosure.   

Slide the enclosure 
straight back into the 
wall opening and prior 
to securing the camera 
to the drywall, pull out 
the level….again.  
Back-cutting the 
drywall and taping the 
edges will aid 
installation. 

Remove the pan locking 
screw prior to connecting 
power to the REVEAL

Содержание 999-6925-000





























Отзывы: