Writing and Editing Macros
C
ONTROL
D
EVICES PAGE
, M
ACROS TAB
If your camera has a current version of firmware, it has two example macros, Preset 1 and Preset 2. You
can safely rename, edit, or delete these macros.
To define a macro:
1. Enter a name in the Macro Editor's Name field.
2. Enter one or more Telnet commands in the editing area.
3. Optional but strongly recommended: Use the Test button to check your work while you are writing the
macro.
4. Save your work when you are finished, or select New to start over.
Note
If the macro has external requirements, it will only run properly if those requirements are met. For example,
if the macro includes a camera preset command, the applicable preset must be stored before the macro
can run successfully. I know I'm repeating myself, but this is important.
51
Complete Manual for the ConferenceSHOT AV Enterprise-Class Conferencing System