One-Channel GSM VoIP Gateway
8
2.2 LED Indicators
The following table defines the status of the LEDs located on the top case and on the RJ-45
connectors.
LED
DESCRIPTION
RUN
1.
When the GoIP1 is booting, this LED will
flash 100ms ON and 100ms OFF.
2.
When the GoIP1 is properly registered
to your softswitch, this LED flashes at a
rate of 1s ON and 1s OFF.
GSM
When the GSM channel is ready to sue, this
LED flashes at a rate of 1s ON and 1s OFF.
2.3 SMS Commands
GoIP1 supports some maintenance commands from SMS.
FUNCTION
SMS CONTENT
REMARK
Obtain LAN Port Info
INFO
Not case-sensitive
Reset device
RESET
Password
Not case-sensitive
Reboot device
REBOOT
Password
Not case-sensitive
Note
：
：
：
：
In command
Reset
and
Reboot
, the Password is the GoIP1 device’s admin password.
The command keywords can be uppercase and lowercase, but the password is
case-sensitive.
1
》
Obtain LAN Port IP Address
Once the GSM SMS with message content “info” or “INFO” is received, the GoIP1 sends
back a SMS message to the sender with the message content containing the LAN Port IP
address.
2
》
Reset GoIP Configuration
Upon receiving the SMS message “RESET <password>” or “reset <password>”, the GoIP1
resets its configurations to factory defaults.
3
》
Reboot GoIP
Upon receiving the SMS message “REBOOT <password>” or “reboot <password>”, the
GoIP1 reboots itself automatically.
Note: <password> is the webpage login password as described in Section 3.1.
