One-Channel GSM VoIP Gateway
43
1
）
）
）
）
Bridge Mode
Select
Bridge
mode if your network topology requires the network devices (PC or others)
to be in the same network segment as the GoIP1 Gateway. In this case, the GoIP1
Gateway functions as an Ethernet Switch.
2
）
）
）
）
Static IP Mode (Default Setting)
Select
Static IP
mode for a new network segment on PC port. In this case, the GoIP1
Gateway functions as Router. Enter the IP address in
IP Address
field with a new
segment address that is different from that on the LAN port. Enter the subnet mask in
Subnet Mask
field accordingly. A commonly used value is 255.255.255.0.
Enable the
DHCP Server
if you want the GoIP1 Gateway functions as a local DHCP host
on PC port. This will enables the GoIP1 Gateway to assign IP Addresses to network
devices that are attached to the PC port.
