Seite 8 von 12 // page 8 of12
Das Dokument darf nur vollständig und unverändert verwendet und weitergegeben werden. Es liegt in der Verantwortung des
Anwenders, die Gültigkeit dieses Dokumentes bezüglich seines Produktes sicher zu stellen. 999195 // 05/02/2008
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully
the validity of this document with respect to his product. 999195 // 05/02/2008
Before starting, read and obey section ”Safety information”!
Isolate pumping unit from the electrical supply.
The kit consists of the following parts
1: controller CVC 3000 for front assembly
2: inlet block with hose nozzle
3: 500 ml catchpot, coated, with joint clip
4: molded PTFE hose
5: union nut with clamping ring
6: 2 x hose clip
Tools required (metric):
- Torx screw driver TX10
- flat-bladed screw driver 2.5 mm
- flat pliers
1
2
3
4
5
6
