5
CLEANING
It may happen that your agitator brush becomes blocked or less
effective. This may be caused by excessive hairs and threads wrapped
around the brush roller.
• Always unplug the nozzle from the power supply first.
Cleaning the brush roller
•
Insert the points of a pair of scissors into the brush roller slot. Move
the scissors to catch the threads and hairs in the scissors.
•
Cut the threads of hairs and remove them manually or using a small
sized pair of pliers.
Should your nozzle cease to pick-up debris:
This can be caused by an obstruction in the intake and or neck of
the power nozzle. This can be caused when excessively large or long
debris, like paper or a sock, is lodged in the intake and/or neck area
of the nozzle.
• Always unplug the nozzle from the power supply first.
Clearing an Obstruction
•
Remove the wand from the nozzle by depressing the button on the
nozzle neck and pulling the nozzle and wand apart.
•
Look into the neck and remove any visable debris.
•
Look into the intake area of the nozzle and remove any visible debris.
10
WANDS
2. (W-300T) Cord Management Telescopic Wand
• Connects to powerbrush and hose
• Cord management--keeps cords out of the way and allows you to
disengage the hose handle from the electric brush
1. (W-419H) Chrome Telescopic Wand
•
Extension wand--can be adjusted to necessary height to lessen back
strain and can be extended to reach high areas
•
Extends from 23-1/2” to 39” in 3/4” increments
•
Hole in the top, friction fit on the bottom
Attaching tools or hose handle to the
wand: The straight, outer wand is designed
to fit into your hose handle. Insert the wand
into the handle. The notched inner wand is
designed to fit into your cleaning tools. A 1/4
turn ensures a good fit. To remove the wand,
give a 1/4 turn in the opposite direction and
pull the cleaning tool or handle from the wand.
1
2
TELESCOPIC RATCHET WAND OPERATING INSTRUCTIONS
To extend wand: Push the black button in the direction of the arrow
and hold in place. This releases the ratchet and allows the inner wand to be
extended. The wand can be locked into the desired length by releasing the
button at any of the notches. To retract the wand, hold down on the black
button and push the wand back into the outer wand.
Do NOT remove wands while power is on.
IMPORTANT:
