VacuMaid EK12, Руководство пользователя

Страница: 8 / 16

7
5. Tilt cover to back. Press cover firmly until side and rear
tabs snap into place. Turn the electric brush upside down
and replace the 2 cover screws.
AGITATOR SERVICING:
1. Remove the electric brush cover, agitator cover, belt and agitator assembly. See
“To Remove Belt” in BELT CHANGING AND AGITATOR CLEANING.
2. Remove end caps, washers, screws, end brush, and sprocket pieces from ends
of old agitator assembly.
3. Reassemble agitator assembly. To line up screw holes in dowel, sprocket and
end brush, be sure all of the brush sprocket pieces align properly. See AGITATOR
ASSEMBLY.
4. Reinstall belt, agitator assembly, agitator cover, and electric brush cover. See “To
Replace Belt” in BELT CHANGING AND AGITATOR CLEANING.
AGITATOR ASSEMBLY
Electric Brush
To Check Agitator Assembly:
When brushes are worn to the level of the base
support bars, replace the agitator assembly.
Electric Shock or Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the unit. Failure to do so
could result in electrical shock or personal injury from cleaner suddenly starting.
!
WARNING
4. Line up front of cover and base. Rest cover
on front edge of base as shown.