VacuMaid EK12, Руководство пользователя

Страница: 5 / 16

4
Wand Insertion and Release
To Insert:
Insert wand into electric brush until the
wand button snaps into place.
1. To lower wand, press on the large pedal marked
“Handle Release”.
2. Start vacuum and electric brush.
ELECTRIC BRUSH ASSEMBLY AND USE
To Start:
Suggested Pile Height Settings:
For best deep down cleaning, use the XLO
setting. However, you may need to raise the height to make some jobs easier.
As a general guide:
XLO-most carpet heights, LO-short to medium pile,
MED-medium to long pile, HI-long pile.
The overload protector protects the motor from brush
jamming and belt breakage. If the agitator slows down
or stops, the overload protector shuts the brush off.
To correct problem:
Unplug electrical cord. Check
brush area for excessive lint buildup or jamming.
To reset:
Press the reset button on top of the brush. Plug
in and turn on vacuum and brush.
To Correct & Reset Overload Protector:
Select a pile height setting by using the pile
height lever on the electric brush. The pile height
setting is shown on the control. The deeper the
pile of the carpet, the higher the setting.
To Change Pile Setting:
WARNING !
DO NOT attach or remove handle or wands while cleaner is ON. This
could cause sparking and damage the electrical contacts.
To Remove
: Lock wands in straight-up position.
Then, step on the “Wand Quick Release” pedal with
foot. Now, pull up on wand.