Please review the package first. The packaging material can resist
impact during delivery. Please remove the PE bag to make sure no
damage on the housing. Finally make sure the screws are not loose.
Packaging
Product appearance
Cable Installation
Motorcycle Type
1. Power cable
2. Multi-functional OBD display
(built with GPS and microphone)
3. USB WiFi
4. Car camera (AVM-1225A) x 2pcs
5. 2.5M camera cable
6. 5M camera cable
7. IR Remote Control
▪
Installation Precautions
1. Make sure power connections clear enough to you before installation.
2. System installation is required professional installers and ventilation space.
3. Please use recommended and genuine storage device.
4. Please contact local dealers in case of service requirement.
▪
In Use Precautions
1. Please keep the inner components off any solid or liquid.
2. Please do not disassemble the equipment for warranty issue. Please contact local
dealers or the manufacturer for prompt service.
3. Please remove the battery if remote control keeps idle for quite a long while.
4. The equipment best connects with ground wire in case of outdoor cameras connection
or alarm I/O connection. This is to keep the DVR away from static electricity damage.
▪
Surrounding
1. Please have the DVR under recommended temperature away from the sun and
heating source.
2. Please keep this equipment away from humid surrounding.
3. Please keep this equipment away from smoke and dust.
4. Please do not drop the equipment.
5. Please keep this equipment in ventilation space.
6. Please supply rated voltage and Amp. To the equipment.
7. Please keep flammable objects away from the equipment.
DVR
Installation of SD card
Recording
Attention
(1). Suggest to use class 10, 8GB above.
(2). Before using the memory disk, please format the disk first by
using the software player in the CD-ROM. If not, device will
automatically erase all data in the memory disk before recording.
(3). To ensure recording quality, please do not use adapter card
with Micro SD card. Doing so may lead to bad connection due to
shock and vibration.
(4). All memory disks have limited lifespan. Please regularly watch
videos on PC and check the memory disk to ensure proper
functioning.
(5). Collision and vibration may cause SD card defective and result
intermittent recording, please check data and backup file periodi-
cally.
Safety Precautions
System initialization / Recording
System initializes within 30 seconds when power is on. PWR green
light ON when system is rebooting. System starts to recording when
REC green light is flashing.
Shut off/ Stop recording
Device offer prolonged 3 seconds recording after power off to ensure
data is well stored; user can take out the SD card when indication is off.
Multi-functional OBD display
HD 720P DVR
HD 720P Camera*2
-20~60°C
DC
10~14.5V
MIC
2CH
DVR
HD
720P
Vehicle Type
1. Power cable
2. Multi-functional OBD display
(built with GPS and microphone)
3. USB WiFi
4. Car camera (AVM-1225A) x 2pcs
5. 5M camera cable x 2pcs
6. IR Remote Control
SD CARD
WIFI CAM2 CAM1 ERR PWR
/
REC
Lid screw
Lid screw
IR Receiver
(C)CAM1
(D)CAM2
(A)Power / Recording
(B)Error Indicator
(E)WiFi
SD card slot
PWR GPS
ERR
REC
Power
GPS
Recording
Error
Microphone
(A)
PWR (Green):power indication.
(B)
GPS (Blue):Flashing mean GPS 3D
positioning searching. Consistent blue
light on means 3D positioned successfully.
(C) Microphone:Audio input.
(D)
REC (Green):Flashing means continuous
recording.
(E)
ERR (Red): Error diagnosis, please check
camera signal, OBD display, SD storage
…status.
▪
Lights indicate:
1
2
3
4
5
6
(1) Power connector
(2) Multi-functional OBD display
connector
(3) WiFi antenna
(4) Video out
(5) Camera 1 connector
(6) Camera 2 connector
•
Cables
•
Power cable
a
b
c
d
e
(a) Power connection: reception
(b) Alarm recording (Grey cable): connect to
+12V power to do event recording by alarm
trigged. Can be used together with switch.
(c) Power cable (Red): connect to power positive
connector.
(d) ACC activation cable (Brown): connect to
motorcycle power switch (+).
(e) Ground (Black): connect to power supply (-).
(1). Counterclockwise to unscrew the screw of dustproof lid to install/
takeoff the SD card.
(2). Please do SD card format/ restoration with attached player.
2CH HD DVR / Camera
MOBILE SURVEILLANCE
2CH H.264 DVR
Multi-functional OBD display
H12AE31A01