![background image](http://html1.mh-extra.com/html/vacron/en-cdr-e05/en-cdr-e05_manual_847775007.webp)
5
E. Recording And Stop Recording
1. Power on / Recording:
Wait around 30 seconds after power-on to start up the machine.
The recorder will be started while power supply acts after one
minute.
Green light indicator will keep on when the recorder is in power-on
mode.
The recorder starts to record while red light indicator flashing
Indicator Definition:
●
Red indicator: red light flashing is presented as “on recording”,
the red light flickering shows force recording status.
●
Green indicator: green light means power on
。
●
Yellow indicator: yellow light means in manual photo mode
。
●
Blue indicator: blue light flashing while GPS signal is not stable,
otherwise is stable GPS signals.
2. Power off / Stop recording:
When power supply is shut down, the recording will stop at the
same time and you can remove SD card to read the files.
3. Enter / Exit Displayer Mode:
(a) Select “Playback” to enter display mode on live view, click the
Red indicator
Green indicator
Yellow indicator
Blue indicator
Manual Force Recording