Vacon X5, Руководство пользователя

Страница: 121 / 140

X5 AC Drive User’s Manual Chapter 7: X5 Parameters
DPD00089A - 119 -
© 2009 Vacon Incorporated All Rights Reserved
7.4.4 Advancement on Drive State Conditions
Figure 7-2 shows how the Seq Count parameter is bit-packed with drive state conditions when the
state duration bits are programmed to 1010 and 1011. If the AND (1010) configuration is selected,
then
all bits set in the count parameter must have the corresponding drive state occur for
advancement to the next state. If the OR (1011) configuration is selected, then any bits in the count
parameter must have the corresponding drive state occur for advancement to the next step.
Figure 7-2: Seq Count Parameter’s Drive State Bit-Packed Definition
Running FWD
Running REV
At Speed
Zero Speed
Freq Limit Active
Freq Hyst Active
Current Limit Active
DB Active
High Temp Active
Thres 1 Active
Thres 2 Active
Timer 1 Active
Timer 2 Active
Reminder 1 Active
Reminder 2 Active
Reminder 3 Active
Bit number
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Program data