Vacon NXP, Руководство пользователя

Страница: 50 / 54

50 • vacon Description of parameters
Tel. +358 (0)201 2121 • Fax +358 (0)201 212 205
1530 Analogue output 2 function
(2.3.2.1)
1531 Analogue output 2 filter time
(2.3.2.2)
1532 Analogue output 2 inversion
(2.3.2.3)
1533 Analogue output 2 minimum
(2.3.2.4)
1534 Analogue output 2 scale
(2.3.2.5)
See respective parameters 307 to 311 at
Analogue output 1
.
1535 Analogue output 3 function
(2.3.3.1)
1536 Analogue output 3 filter time
(2.3.3.2)
1537 Analogue output 3 inversion
(2.3.3.3)
1538 Analogue output 3 minimum
(2.3.3.4)
1539 Analogue output 3 scale
(2.3.3.5)
See respective parameters 307 to 311 at
Analogue output 1
.
1540 Relay output 1 inversion
(2.3.4.3)
1541 Relay output 2 inversion
(2.3.5.3)
1542 Relay output 3 inversion
(2.3.6.3)
If the values of these parameters = 0, no inversion of the respective relay output signal takes
place.
1544 Analogue input 1 supervision
(2.2.4)
1545 Analogue input 2 supervision
(2.2.10)
1546 Analogue input 3 supervision
(2.2.17)
The signal level of the respective analogue input is supervised if value 1 is given to this
parameter.
1549 Relay output 1, signal selection
(2.3.4.1)
1550 Relay output 2, signal selection
(2.3.5.1)
1551 Relay output 3, signal selection
(2.3.6.1)
1552 Relay output 4, signal selection
(2.3.7.1)
Connect the RO signal to the relay output of your choice with this parameter using the TTF
programming method. More information on the TTF method in Vacon All in One Application
manual. You will find the relay output signal contents on page 30.
1553 Relay output 4 function
(2.3.7.2)
See Table 33.
1554 Relay output 4 inversion
(2.3.7.3)
See par. ID1540.
1555 Relay output 5, signal selection
(2.3.8.1)
See par. ID1549.
1556 Relay output 5 function
(2.3.8.2)
See Table 33.