Vacon alfiff28, Руководство пользователя

Страница: 21 / 44

description of parameters vacon
•
21
24-hour s358 (0)40 837 1150 • Email: vacon@vacon.com
2.3.1.8 Mechanical brake reaction time
Mechanical brake reaction time will hold the speed reference for the defined time by
this parameter. This hold time should be set according to the mechanical brake
reaction time (see
figure 2 )
2.3.1.9 Maximum frequency brake closed
Output frequency does not exceed this value when mechanical brake is closed. When
modifying this parameter make sure that the brake release by frequency (see
parameter
2.3.1.5/2.3.1.6 ) is possible with new value.
Closing Brake Parameters (M2 -> G2.3.2)
2.3.2.1 Frequency limit closing
The output frequency limit for the brake closing. The run request signal needs to be
disabled to allow the signal to affect.
2.3.2.2 Closing delay
The brake closing is delayed with defined time. If set to zero there is no delay between
the brake closing condition and the actual brake closing.