-16-
IMPORTANT:
The filter and the filter basket must be completely dry before reuse.
6. Insert the clean and dry filter into the basket. Fit the basket into the dust cup and
reconnect the dust cup to the hand vacuum.
Cleaning the Motorized Powerhead & Blockages
The brush roll may accumulate debris such as strings, hair and fibers. This type of
debris can wrap around the brush and diminish its ability to clean effectively.
To Remove Brush Roll for Manual Cleaning:
1. Make sure the vacuum cleaner is turned OFF then remove the hand vacuum
and set aside.
2. Turn the unit over to access the brush roll. As shown below,push and slide the
tab to the right to unlock, then lift the brush roll out of housing. Clean off debris
and anything wrapped around the brush. Use a pair of scissors to remove
threads, etc.
To Remove Powerhead Blockages:
1. To clean out the powerhead, press the two nozzle release buttons, and pull
the powerhead away from the main vacuum body.
3. Place the brush roll back into the housing by aligning the hexagon end to the
powerhead first, then inserting the other end correctly into place and lock the
tab.
1
2
1
Nozzle Release Button
