9
ARY, Inc. | 5200 W 110th Street Suite 200, Overland Park, KS 66211 | VacMasterFresh.com | 800-821-7849
VP
95
Chamber Vacuum Sealer |
User Guide
Oil Cleaning Button function
The oil cleaning program runs the vacuum pump for 30 cycles. During
this program, pump and oil reach operating temperature. Moisture in the
pump is absorbed by the oil. The high temperature causes any moisture
in the pump to evaporate, and minimizes the risk of corrosion.
It is advisable to run the program before using the machine for the first
time, after the machine has been stationary for a lengthy period of time,
and especially prior to changing oil to avoid contamination to new oil.
Run the pump cleaning program every week. If you package moisture-
containing products, such as soups and sauces, the pump cleaning
program should be run every day.
To Activate Oil Cleaning:
▫
Press the Oil Cleaning button.
▫
Close the lid to start the oil cleaning program.
▫
The oil cleaning program will run for 30 cycles.
▫
Disconnect the power cord from the electrical outlet by unplugging it.
DO NOT disconnect by pulling on the cord.
▫
DO NOT immerse in water or spray directly with liquid.
▫
Check the Vacuum Chamber and Gasket, making sure they are clean
and free of debris. If needed, use a clean, damp cloth with mild soap.
a. Wipe the vacuum chamber clean.
b. Wipe the gasket and seal pad clean.
c. Wipe the seal area clean.
▫
Do not store the VP95 outside.
▫
DO NOT use any acetone-based or abrasive cleaners on plastic parts.
Only clean with a damp cloth and mild soap.
Cleaning & Storage
Push this
button to
activate
