background image

7

1.  Verify that the power cord is disconnected from the outlet (Fig. 1).  

2.  In order to prepare your vacuum for dry vacuuming, verify that the cartridge filter is securely 

mounted. Make sure the filter is pushed in until it stops against the power head.  Your Wet/Dry 

Vac comes with the cartridge filter pre-installed. For installation instructions, see page 11.

3.  Optional: For improved dust filtering, fit collection bag flange onto the inlet port, taking care not 

to damage the bag. Dust bag sold separately.

4.  Place the power head back on the collection tank, aligning the top section with the latches, and 

snap into place (Fig. 2).  

OPERATING INSTRUCTIONS: DRY VACUUMING

5.  Insert the locking end of the hose into the vacuum port and lock in place (Fig. 3).

6.  Choose the desired accessory and insert onto the end of the hose (Fig. 4).  

7.  Plug the power cord into the outlet (Fig. 5).  

8.  

Turn the motor on by flipping the power switch to the ‘I’ (ON) position and begin vacuuming (Fig. 6).

9.  Once you have completed vacuuming, flip the power switch to the ‘O’ (OFF) position and unplug 

the power cord from the outlet.

O = OFF I = ON 

DO NOT USE THE CARTRIDGE FILTER FOR LIQUID VACUUMING.

DO NOT USE DUST BAG FOR LIQUID VACUUMING.

DRY VACUUM OPERATION

WARNING:  BE SURE TO READ, UNDERSTAND, AND APPLY, INFORMATION ENTITLED 

‘SAFETY INSTRUCTIONS & WARNINGS’.  DO NOT VACUUM IN AREAS WITH FLAMMABLE 

GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR.  FLAMMABLE GASES OR VAPORS 

INCLUDE BUT ARE NOT LIMITED TO: LIGHTER FLUID, SOLVENT TYPE CLEANERS, OIL-

BASED PAINTS, GASOLINE, ALCOHOL, OR AEROSOL SPRAYS.  EXPLOSIVE DUSTS 

INCLUDE BUT ARE NOT LIMITED TO: COAL, MAGNESIUM, GRAIN, OR GUN POWDER.  

TO REDUCE THE RISK OF HEALTH HAZARDS FROM VAPORS OR DUST, DO NOT 

VACUUM TOXIC MATERIALS.

WARNING:  DO NOT PLUG POWER CORD INTO POWER OUTLET.   MAKE SURE PLUG IS 

DISCONNECTED BEFORE CHANGING THE FILTERS.

CAUTION:  

Do not vacuum drywall dust, fireplace soot, or ash with a standard Wet/Dry filter. This is 

a very fine dust which will not be captured by the filter and may cause damage to the motor. When 

vacuuming fine dust, buy a fine dust filter. To purchase the additional fine dust filters, call 

1-866-384-8432 or get them at your local or online Vacmaster

®

 retailer.

DRY VACUUMING

4

4

3

6

1

5

 2

Содержание VJH1211PF 1101
















Отзывы: