Vacmaster VJH1211PF 0203, Руководство оператора

Страница: 9 / 15

9
LIQUID VACUUM OPERATION
LIQUID VACUUMING
1. Verify that the power cord is disconnected from the outlet. Make sure that the collection tank is
clean and free of dust and dirt (Fig. 1).
2. Remove the cartridge filter, then carefully install the foam wet filter over the filter cage and
place the power head back on the collection tank. For foam wet filter installation instructions,
see page 12 (Fig. 2).
DO NOT USE THE CARTRIDGE FILTER FOR LIQUID VACUUMING.
OPERATING INSTRUCTIONS: WET VACUUMING
3. Push the required attachment onto the free end of the hose or extension wand (Fig. 3).
4. Ensure that the on/off switch is in the ‘O’ OFF position before plugging the power cord into the
outlet (Fig. 4).
5. Turn the motor on by pressing the switch to the ‘I’ ON position (Fig. 5).
not to damage the bag.
5. Place the power head back on the collection tank, aligning the top section with the latches, and
lock into place (Fig. 5).
OPERATING INSTRUCTIONS: DRY VACUUMING
6. Insert the locking end of the hose into the vacuum port and turn to lock into place (Fig. 6).
7. Choose the desired accessory and insert onto the end of the hose or extension wand (Fig. 7).
8. Verify that the switch is in the 'O' (OFF) position before plugging the power cord into the outlet.
9. Plug the power cord into the outlet (Fig. 8).
10. Turn the motor on by flipping the on/off switch to the ‘I’ (ON) position and begin vacuuming (Fig. 9).
11. Once you have completed vacuuming, press the on/off switch to the ‘O’ (OFF) position and
unplug the power cord from the outlet.
O = OFF I = ON
DO NOT USE THE CARTRIDGE FILTER FOR LIQUID VACUUMING.
DO NOT USE THE DUST BAG FOR LIQUID VACUUMING.
1 4 5 3 2
6
WARNING: BE SURE TO READ, UNDERSTAND, AND APPLY INFORMATION ENTITLED
“IMPORTANT SAFETY INSTRUCTIONS”. DO NOT VACUUM IN AREAS WITH FLAMMABLE
GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE GASES OR VAPORS
INCLUDE BUT ARE NOT LIMITED TO: LIGHTER FLUID, SOLVENT TYPE CLEANERS, OIL-
BASED PAINTS, GASOLINE, ALCOHOL, OR AEROSOL SPRAYS. EXPLOSIVE DUSTS
INCLUDE BUT ARE NOT LIMITED TO: COAL, MAGNESIUM, GRAIN, OR GUN POWDER. TO
REDUCE THE RISK OF HEALTH HAZARDS FROM VAPORS OR DUST, DO NOT VACUUM
TOXIC MATERIALS.
WARNING: DO NOT PLUG THE POWER CORD INTO A POWER OUTLET. MAKE SURE
THE PLUG IS DISCONNECTED BEFORE CHANGING THE FILTERS.