16
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
The wet/dry vacuum will not
operate.
No power supply.
Check the power supply, cord,
breakers, and fuses.
Faulty power cord.
Unplug and check the power
cord. If damaged, have it
repaired by a professional.
Collection tank is full.
Empty the collection tank.
Switch in the wrong position.
Press the ON ‘I’ button on the
power head.
The dust comes out from
the motor cover.
The cartridge filter is missing or
damaged.
Attach or replace the cartridge
filter.
Vacuum has been used to collect
fine dust, such as dry wall dust,
fireplace soot, or ash, without a fine
dust filter.
Remove the standard cartridge
filter and buy the appropriate
fine dust filter.
Reduced efficiency and
motor/speed vibration.
There are blockages in the nozzle,
hose, or the collection tank inlets.
Unplug and check nozzle, hose
and collection tank inlets for
blockages.
The cartridge filter is clogged by
fine dust.
Take off the filter and clean it or
install a new cartridge filter.
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK, UNPLUG BEFORE
TROUBLESHOOTING.
