background image

SAFETY INSTRUCTIONS & WARNINGS

EXTENSION CORDS

This Wet/Dry Vac is double-insulated, eliminating the need for a separate grounding system. Use
only identical replacements parts. Read the instructions for Servicing Double-Insulated Wet/Dry
Vacs before servicing. Use this Wet/Dry Vac as described in this manual. Observe the following
warnings that appear on the motor housing of your Wet/Dry Vac.

When using an extension cord with your Wet/Dry Vac refer to the following table to determine 
the required A.W.G. wire size. Before using the vacuum cleaner, make sure the power cord and  
extension cord are in good working condition. Make repairs or replacements before using the 
vacuum cleaner. Only use extension cords that are rated for outdoor use.

• To reduce the risk of electric shock-unplug before cleaning or servicing.
• DO NOT use without fi lters in place.

CAUTION: TO REDUCE THE RISK OF INJURY FROM MOVING PARTS- UNPLUG BEFORE 
SERVICING.

DOUBLE INSULATED - GROUNDING NOT REQUIRED - WHEN SERVICING USE 
ONLY IDENTICAL REPLACEMENT PARTS.

TO REDUCE THE RISK OF ELECTRIC SHOCK-DO NOT EXPOSE TO RAIN.  

STORE INDOORS.

WARNING:

4

Length of Extension Cord

A.W.G. Wire Size

Not recommended

25 Feet 

 7.5 Meters

50 Feet   

  15.25 Meters

100 Feet 

   30.5 Meters

150 Feet  

  45.7 Meters 

110V-120V

Amps

0-6

7-10

11-12

13-16

18
18
16
14

16
16
16
12

16
14
14

14
12
12

WARNING:

                   

WITH A DOUBLE-INSULATED WET/DRY VACUUM, TWO SYSTEMS OF INSULATION ARE
PROVIDED INSTEAD OF GROUNDING. NO GROUNDING MEANS IS PROVIDED ON A
DOUBLE-INSULATED APPLIANCE, NOR SHOULD A MEANS FOR GROUNDING BE ADDED.
SERVICING A DOUBLE INSULATED WET/DRY VACUUM REQUIRES EXTREME CARE AND
KNOWLEDGE OF THE SYSTEM, AND SHOULD BE DONE ONLY BY QUALIFIED SERVICE
PERSONNEL. REPLACEMENT PARTS FOR A DOUBLE-INSULATED WET/DRY VACUUM
MUST BE IDENTICAL TO THE PARTS THEY REPLACE. YOUR DOUBLE-INSULATED
WET/DRY VAC IS MARKED WITH THE WORDS ‘DOUBLE INSULATED’ AND THE SYMBOL
     (SQUARE WITHIN A SQUARE) MAY ALSO BE MARKED ON THE APPLIANCE.

SERVICING OF DOUBLE-INSULATED WET/DRY VACUUM

Содержание VJC809PF















Отзывы: