-7-
1. Insert the main body into the floor nozzle and secure with screws provided.
Insert four screws into the front of the main body, and insert one screw into the
back of the main body.
Note:
Make sure all screws are installed into place correctly. If the screws are not
installed or not fully tightened, this may impact the performance of the vacuum
cleaner and may cause personal injury or damage. Do not over-tighten the
screws.
2. Insert the connection hose into the main body until you hear a click.
GENERAL ASSEMBLY INSTRUCTIONS
3. There is a screw bolt and nut pre-installed into the top of the main body. You
need to remove the bolt before installing the handle into the main body.
Assembly Instructions
Main Body
Connection Hose
Floor Nozzle
