Vacmaster RESPIRA UC0412EUK, Руководство пользователя

Страница: 14 / 24

14
GB
TROUBLESHOOTING
WARNING:
Disconnect electrical supply before performing maintenance to the vacuum
cleaner. Failure to do so could result in electrical shock or personal injury.
Cleaning Performance
Vacmaster vacuum cleaners are tested for endurance. If your motor is operating, then the most
likely cause for a loss in suction is a blockage or an opening in the vacuum.
To maintain a high cleaning performance from your machine, it is important to replace or clean
filters as necessary. Empty full dust cup to prevent performance drops. A performance drop with
clean filters can only be caused by a blockage in the tools or the hose.
PROBLEM POSSIBLE CAUSE SOLUTION
Vacuum cleaner
will not run.
The plug is not plugged into the
power source.
Plug in firmly, press the On/Off switch
to “I” or “II” position.
The On/Off switch is not pressed
to start the vacuum cleaner.
Press the On/Off switch to “I” or “II”
position.
Motor overheating protection
during use.
Unplug the power cord and let the
vacuum cool down for 50 minutes
before restarting it for use.
Functional fault in the power cord,
switch, or motor.
Have the damaged part checked by
qualified personnel or contact the
after sales helpline.
Defective wall outlet.
Check with a good appliance or lamp.
Be sure the power cord plug is fully
plugged into a good wall outlet.
Dirt pick-up is poor
or suction power is
weak.
Full or clogged dust bin. Empty the dust bin (page 11).
Filters need cleaning.
Follow filter cleaning instructions on
page 11&12.
The flexible hose is worn.
Replace the hose. Contact the after
sales helpline.
The brushroll is worn.
Contact the after sales helpline for
assistance.
The foam and felt filters are dirty
or worn.
Clean the foam and felt filters.
Replace if they are worn or broken.
Follow instructions on page 12.
There is a clog in the flexible hose
or connection hose of the vacuum
cleaner.
Check and remove all clogs. Follow
instructions on page 13.