V2 ZARISS-M, Руководство пользователя

Страница: 8 / 42

EN
GLIS
H
46
To install the ZARISS motor, follow the following steps closely:
1.
Fix bracket
A
to the pillar using rawplugs suited to the pillar
material
PLEASE NOTE:
the bracket should be perfectly horizontal.
Use a spirit level to accurately position the bracket
2.
Position the straight arm
C
on the motor shaft
3.
Tighten screw
E
, after having inserted the washer
PLEASE NOTE:
the casing
D
should be fitted later, after
having fixed the opening mechanical stop
4.
Fix the motor reducer onto bracket
A
using the two screws
F
and the relevant nuts and washers
5.
Fit the curved arm
G
onto the straight arm
C
using the
pivot-pin I and snap-ring L
6.
Fit the bracket
B
onto the curved arm
G
using the pivot-pin
I
and snap-ring
L
7.
Fix the bracket
B
onto the gate by welding or using
appropriate screws for the gate-leaf material
PLEASE NOTE:
bracket
B
should be level with the lower part
of bracket
A