15
PROGRAMMING THE OPERATION LOGIC
Several operation modes of the unit are available to be chosen, by changing the dip-switch positions on the unit
accordingly. In the following, two tables are displayed explaining the functions associated to ever y single dip-switch for
both models.
Active
Non-active
Pre-blinking
Active
Non-active
Automatic closing
Not received
Received
Star t while opening
Step-by-step function
START while opening command activates closing
Logica del comando di star t
Active
Non-active
Rolling code
Active also while opening
Non-active while opening
Photocell
FUNCTION
POSITION
DESCRIPTION
CONNECTIONS TO THE TERMINAL UNIT
Motor power supply during the opening
Motor common terminal
Motor power supply during the closing
Power supply phase wire
Power supply neutral wire
Flasher 40 W
Power supply output 24 VAC / 6 W for photocells and
other attachments
Opening control for the connections of control devices
with normally open contact (led L2)
STOP command. Normally closed contact (led L3)
Common (-)
Photocell. Normally closed contact (led L4)
Antenna cable shielding
Antenna
Limit switch (FCA led L5 / FCC led L6)
1
2
3
4
5
6 - 7
8 - 9
10
11
12
13
14
15
16
IMPORTANT
:
Normally closed inputs (STOP, PHOTO), if not used,
must be bridged through the common terminal (-)
Содержание ECOGOLD230
