V-ZUG WineCooler V6000 Supreme, Руководство по эксплуатации

Страница: 22 / 28

9 Noises
9 Noises
The appliance can make various noises during operation. Although the appliance is
noise-optimized, some noise cannot be eliminated completely. This noise depends on
the size of the appliance, how it is installed and the cooling requirements (e.g. fast cool-
ing), the ambient temperature and the installation conditions. Operating noises are partic-
ularly audible immediately after switching on the compressor; however, these noises be-
come quieter as the appliance runs.
Unusual noises are often caused by improper installation. The appliance must be in-
stalled on a level and stable surface. In open kitchens or in the case of appliances in-
stalled in partitioned areas, normal operating noises may seem louder. This is not a fault
but rather an effect of the design/architecture.
10 Trouble-shooting
This section lists faults that can be solved simply by following the instructions given. If
the fault cannot be remedied, please contact Customer Services. Before contacting Cus-
tomer Services:
▸ Please note down the serial number (SN), which is shown on the identification plate
, and
▸ the sequence of events that led to the fault.
Display message / Fault Solution / Measures
Display: Power failure! ▪ The appliance turns back on automatic-
ally when power is restored and displays
the warmest recorded temperatures.
▸ Press the button to acknowledge the
acoustic alarm message.
Display: Appliance door open ▪ The appliance door is left open for
longer than 3 minutes.
▸ Close the appliance door.
Display: Refrigerator compartment too
warm ▪ The appliance displays the warmest re-
corded temperatures in the correspond-
ing zone.
▸ Press the button to acknowledge the
acoustic alarm message.
▸ Do not place warm bottles right next to
the temperature sensor. Further info:
General information on using the appli-
ance.
Display: Refrigerator compartment too cold ▸ Wait for 12 hours.
▸ If the fault persists, please contact Cus-
tomer Services.
Display: Error code
▸ Press the button to acknowledge the
acoustic alarm message.
▸ Contact Customer Services.
22