4 Operation
4
Operation
4.1
Switching the appliance on
▸ Plug in the appliance at the mains socket.
–
«OF» appears on the left- and right-hand side of the display for 30 seconds.
▸ Hold the
button depressed for 3 seconds.
–
The appliance is switched on.
A newly installed appliance takes up to 5 hours (empty state / without any bottles
inside) to reach its normal operating temperatures. The corresponding zone sym-
bol / continues to flash in the display until the cooling compartment temper-
ature is reached.
4.2
Setting the temperature
Setting range
The required temperature for each zone is entered one after the other (depending on
model).
Temperature zone
Degrees Celsius [°C] Fahrenheit [°F]
Upper and lower
cooling compart-
ments (51102)
Setting range
5 to 20
41 to 68
Recommended setting
10 to 12
50 to 54
Cooling compart-
ment (51113)
Setting range
5 to 20
41 to 68
Recommended setting
10 to 12
50 to 54
Notes on the storage of Notes on storage of wine (see page 25).
Procedure for the WineCooler V4000 90 (51102)
▸ Touch the
,
or
button.
–
The temperature display for the upper cooling compartment flashes on the left-hand
side of the display.
▸ Touch the
or
button and select the desired temperature for the
upper cooling
compartment
.
▸ Confirm with the
button to accept the entry.
–
The temperature display for the lower cooling compartment flashes on the right-
hand side of the display.
▸ Touch the
or
button and select the desired temperature for the
lower cooling
compartment
.
▸ Confirm with the
button to accept the entry.
–
The temperature setting has been entered successfully.
–
The temperature will be reached in a few hours, depending on the setting.
The effective temperature may at times be different from the selected set temperat-
ure value if the door is open for an extended period of time or if warm bottles have
been placed inside.
10