V-ZUG UnimaticWash V4000, Руководство по эксплуатации

Страница: 39 / 56

9 Trouble-shooting
Display Possible cause Solution
Large unbalanced load
spin extended
▪ Large unbalanced load
in the washing drum.
The appliance tries to
improve the distribution
of the wash load. The fi-
nal spin is extended. ▸ Wash large and small items
together to reduce the pos-
sibility of unbalanced loads
forming.
9.2 Other possible problems
Problem Possible cause Solution
The programme duration is
significantly longer than in-
dicated. ▪ Using too much wash-
ing detergent. Lengthen-
ing the rinsing time. ▸ Reduce the amount of
washing detergent used
next time.
▪ Large unbalanced load
in the washing drum. ▸ Wash large and small items
together to reduce the pos-
sibility of unbalanced loads
forming.
▪ Inlet water very cold.
Heating is extended. ▸ No action is necessary.
The washing has not been
spun or has been spun in-
sufficiently. ▪ The spin speed set is
too low. ▸ Increase the spin speed for
the next wash cycle (see
page 24).
▪ Too unbalanced a load
in the washing drum.
The wash items cannot
be more evenly distrib-
uted. ▸ Wash large and small items
together.
▪ «Steam anti-crease»
was selected and the
appliance was not
standing level. ▸ Optimize the appliance set-
up according to the installa-
tion instructions.
The appliance vibrates
heavily when spinning. ▪ The transport lock has
not been removed. ▸ Remove transport lock (see
page 7).
▪ The feet of the appli-
ance are not properly
adjusted. ▸ Optimize the appliance set-
up according to the installa-
tion instructions.
▪ The load could not be
optimally balanced in
the washing drum. This
is not a malfunction. ▸ Wash large and small items
together.
39