V-ZUG Maxi-Flex GK46TIMAS, Руководство по эксплуатации, Страница: 13 / 32

4 Operating the appliance
Switching PowerPlus on
▸ Use the slider to select the desired cooking zone.
▸ Touch P on the slider.
– «P» illuminates in the display.
– After 10 minutes it automatically switches back to power level 9.
Removing the cookware interrupts PowerPlus. PowerPlus is resumed as soon as
the cookware is returned to the cooking zone.
Ending PowerPlus before time
▸ Use the slider to select the desired cooking zone.
▸ Use the slider to set any power level.
Power management
PowerPlus cannot be used with both
cooking zones of a group (
A or B ) at the
same time. If PowerPlus is activated with
both cooking zones of a group, then the
power output is reduced for the cooking
zone that was first selected.
1
2 3
4
A B
1
2 3
4
A B
PowerPlus with
cooking zone
Group A * PowerPlus with
cooking zone
Group B *
1 2 3 4
1 P 5 3 P 5
2 5 P 4 5 P
*Maximum available power level with cooking zones
If the power level is increased above these levels, PowerPlus switches off.
4.9 AutoCook
Do not leave food cooking unattended while using the automatic boost. Risk of
food boiling over, burning on and igniting!
With the automatic boost, a cooking zone works at power level 9 for a certain duration
(see table). When this duration is up, it automatically switches back to the previously set
power level.
Power level / function 1 2 3 4 5 6 7 8/9
Automatic boost in mins.:secs. 0:40 1:15 2:00 3:00 4:15 7:15 2:00 3:15
If, during the automatic boost, a higher power level is selected, the duration will
change automatically.
Switching AutoCook on
To set the automatic boost, a power level must already be set.
▸ Use the slider to select the desired cooking zone.
▸ Touch the
button.
– The «Cooking zone dependent functions» menu appears. The cooking zone selec-
ted is indicated by illuminating in the layout.
13