V-ZUG Maxi-Flex GK46TIMAS, Руководство по эксплуатации, Страница: 10 / 32

4 Operating the appliance
3.7 OptiGlass
Applies to GK46TIMASCO, GK46TIMASZO, GK57TIMSZO
Hobs with OptiGlass have an additional coating on the glass surface.
This coating makes the surface harder, tougher and more scratch resistant than non-
coated glass surfaces.
Under normal circumstances, significantly fewer scratches should occur on the
glass surface during cooking. However, even a sharp grain of sand or particle of
grit, for example, under a pan can cause scratches.
Illumination
▸ Halogen or LED light bulbs are recommended for illuminating hobs with the OptiGlass
coating.
The use of fluorescent tube lighting to illuminate hobs with the OptiGlass coating
causes the glass surface to shimmer.
4 Operating the appliance
4.1 Switching the appliance on and off
All the appliances are operated in the same way.
▸ To switch the appliance on: Hold the button depressed for 1 second.
– «0» illuminates in all the power level displays.
– If no other button is pressed, the appliance switches off after about 10 seconds for
safety reasons.
▸ To switch the appliance off: Hold the button depressed for 2 seconds.
4.2 Setting a cooking zone
▸ Touch or swipe the slider to select the desired
cooking zone.
– The cooking zone selected illuminates red.
0 0
0 0
▸ Touch or swipe the slider to set the power level
while the cooking zone is illuminated.
0 9
0 0
4.3 Switching a cooking zone off
▸ Use the slider to select the desired cooking zone.
▸ Touch «0» on the slider.
10