Fig. 20
u
Place the foam pad in the plinth panel – this is essential
for separating air flows!
Fig. 21
u
Fit the plinth panel (2) without securing.
u
Position the unit door and the unit plinth panel for
testing.
u
If plinth panel (2) is visible, pull it forward until the front
edge of the ventilation grid and the unit plinth panel are
in line.
-or-
u
If the plinth panel (2) is hidden, push it right back.
u
Ensure that the ventilation slots are completely free: If
necessary, cut some off the height of the unit plinth
panel (U).
w
Adjust the bar height (V) under the plinth panel (2) along
the recess width (W).
Fig. 22
u
Fit and secure the plinth panel: Hold the plinth panel and
insert the catch.
u
Fix the unit plinth panel.
To secure appliance in the recess:
Fig. 23
u
If affixing the unit under a worktop, use 2 screws to
secure the fixing bracket under the worktop.
Fig. 24
u
If attaching the unit at the side, screw the fixing bracket
into the recess with one screw on each side.
9.2 Fitting the unit door
u
Fit the handle on the unit door.
Fig. 25
u
Check 8 mm presetting. (Distance between appliance
door and lower edge of crosspiece)
u
Push up assembly aids Fig. 25 (12) to unit door height.
Lower edge ▲of the assembly aid = top edge of the unit
door to be fitted.
u
Unscrew fastening crosspiece Fig. 25 (11) by undoing the
locknuts Fig. 25 (10).
Installation
* Depending on model and options
9
