Installation instructions
Built-in variants of gas hob
Multi-sliders GAS411/421/641/951
1014422-R09
27/07/2017
1014422-R09
8
Changes to the service menu
Changes to the service menu can only be made within 1 minute of applying the voltage. If the appliance has already been connected
for a longer period, interrupt the power supply for about 10 seconds.
▸
With the hob switched off, hold the
and buttons depressed at the same time for 4 seconds.
–
An acoustic signal is emitted.
▸
Hold both sliders
to the left of the button depressed at the same time for 4 seconds.
–
An acoustic signal is emitted.
For appliance GAS411, simply press the single slider
.
▸
Use the
button to select the next highest and the button the next lowest user setting.
–
The current service menu item is shown in the timer display.
The current value under the corresponding menu item is displayed above the first active slide to the left of the button. Use the first
active slider to the left of the button to change the values. The left half of the slider functions as the minus button and the right half
functions as the plus button.
Menu item
Function
Default setting
Setting
Description
Set gas type
G20, 1 kPa
G30/31, 2.75 kPa
Software version number
of touch control
The current software version
is displayed: U-x-x-x.
Software variant number
of touch control
The current software variant
is displayed: P-x-x-x.
Display text
All displays illuminate.
Demo mode
The demo mode is switched off.
The demo mode is switched on.
▸
To save entries: Hold the
and buttons depressed at the same time for 2 seconds.
–
An acoustic signal is emitted.
–
The «Service menu» mode is ended.
Cancelling user settings
▸
Press the button.
–
Any changes made to the default values are not saved.
–
The «Service menu» mode is ended.
Error Er 47
▸
Applies to both types listed in the table.
If error Er 47 appears in the display, communication to the slider control is not working correctly.
Under menu item
, set the correct setting values as indicated in the table below.