3 Operation
3.6
Switching the intensive level on / off before time
▸ Touch the
button.
–
The
I
button illuminates.
–
The intensive level switches on.
▪
If a power level had been running beforehand, then the appliance will automatically re-
vert to this power level after six minutes have elapsed.
▪
If the appliance had not been switched on beforehand, then the appliance will auto-
matically switch off after six minutes have elapsed.
▸ Touch the
button again.
–
The
I
button goes out.
–
The intensive level switches off before time.
3.7
Switching after-running time on/off
In the after-running time, the motor and illumination continue to run for 30 minutes and
then switch off automatically.
The after-running time can only be selected using the remote control.
▸ Touch the
button.
▸ Touch the
or
button repeatedly until the desired power level is reached.
▸ Touch the
button.
–
The after-running time switches on.
–
The LED for the corresponding power level flashes once per second for 30
minutes.
▸ Touch the
button again.
–
The LED for the corresponding power level no longer flashes.
–
The after-running time function switches off before time.
3.8
Switching the CleanAir function on / off before time
The air extraction is switched on every hour for ten minutes at power level 1. After 24
hours, the CleanAir function switches off.
The CleanAir function can only be selected using the remote control.
▸ Hold the
button depressed for two seconds.
–
The CleanAir function switches on.
–
The LED for the
button flashes twice per second.
▸ Hold the
button depressed again for two seconds.
–
The LED for the
button goes out.
–
The CleanAir function switches off before time.
10
Содержание DSDSR12
Страница 1: ...Operating instructions DSDSR12 Range hood...
Страница 17: ...17 10 Notes...
Страница 18: ...18...