V-ZUG DFPQS9, Руководство по эксплуатации

Страница: 15 / 28

5 Care and maintenance
5.1 Cleaning the housing
Take care that no water gets into the housing of the appliance! If wa-
ter gets into the housing, it can cause damage.
Do not use abrasive cleaners, scouring pads, steel wool, etc. for
cleaning, as they can damage the surface. Remove the screw fuse or
switch off the circuit breaker.
Cleaning the outside/inside
▸ Clean the outside using a slightly damp cloth – and detergent if necessary
– and wipe dry.
Grease and condensate water can build up on the inside next to the metal
grease filters.
▸ Clean using a slightly damp cloth – and detergent if necessary – and wipe
dry.
5.2 Cleaning the grease filters and combi filters
The grease filters must be cleaned at least once a month with normal use or
whenever the
button flashes. If cleaned monthly, the service life of the
grease filter is as long as that of the range hood.
The saturation indicator becomes visible when the appliance is in op-
eration or a power level is activated.
Removing the grease filters and combi filters
▸ Pull the flat deflector plate completely out and switch the appliance off.
▸ Fold down the grip
2
on the grease filter
1
.
90 cm model:
▸ Carefully take the holder with both
grease filters down and out.
▸ Take both grease filters out of the
holder.
1
2
3
4
55 cm / 60 cm model:
▸ Carefully take the grease filter
1
down and out.
▸ Fold down the grip
4
on the combi filter
3
.
▸ Carefully pull the combi filter
3
down and out of the holder.
15