8 Care and maintenance
SteamerCleaner
Not suitable for non-anodized aluminium surfaces or plastic surfaces. Wear pro-
tective gloves and protective goggles. Immediately rinse away any splashes with
plenty of water.
«SteamerCleaner» was developed especially for this appliance.
▪
Dissolves fat and removes burned-on food debris efficiently
▪
Makes stainless steel shine
▪
The practical spray head reaches all surfaces of the cooking
space, good adhesion
▪
Environmentally friendly, food friendly
▪
No unpleasant odours
Fill the water tank with fresh water and slot into position in the water tank compart-
ment.
▸ Long touch the display.
–
The start screen appears.
▸ Select the «Cleaning» application group and confirm with «OK», if required.
▸ Select «Intensive cleaning» and confirm with «OK».
–
The settings for «Intensive cleaning» appear in the display.
▸ Set a delayed start, if required (see page 21).
▸ Press «Start» to start «Intensive cleaning».
Removing the accessories and coarse soiling
▸ When the corresponding message appears in the display: Remove the accessories
and fully extending runners.
▸ Confirm the message with «OK».
–
Steam loosens up any baked-on soiling in the cooking space.
Spraying on the cleaner
▸ When the corresponding message appears in the display: spray on the cleaner.
▸ Confirm the message with «OK».
–
The cleaner starts to work.
Wiping down the cooking space
▸ When the corresponding message appears in the display: wipe down the cooking
space.
▸ Confirm with «OK».
–
The cooking space is cleaned with steam. Excess cleaner is washed off.
▸ When the corresponding message appears in the display: wipe down the cooking
space and open the appliance door as far as its airing position.
▸ Confirm with «OK».
–
The cooking space is dried.
–
The following appears in the display: «Process finished».
58
Содержание CS6T-23034
Страница 78: ...78 15 Notes...