![background image](http://html1.mh-extra.com/html/v-zug/combair-v6000-60/combair-v6000-60_operating-instructions-manual_3289472058.webp)
8 Care and maintenance
Fitting the door seal
The joint
X
must be at the bottom in the middle.
▸ Fit the seal starting in one of the corners at the
top.
▸ Insert the clip so that it hooks into the outer
slot.
▸ Once the seal is fitted at the top, insert the bot-
tom two clips.
▸ Lightly press the seal into the groove all
around, i.e. along the top, bottom, left and
right.
1.
2.
3.
4.
X
Checking the seal is seated properly
All four clips must be hooked in.
▸ If not, remove the seal and put the corner hooks in again.
▸ Lightly press the seal into the groove all around, i.e. along the top, bottom, left and
right.
8.9
Replacing the LED light bulb
The LED light bulb cannot be removed. For safety reasons, the LED light bulb
must be replaced by our Customer Services.
8.10
Cleaning the accessories and shelf guides
▪
The wire shelf and shelf guides can be cleaned in the dishwasher.
▪
The baking tray can be cleaned in the dishwasher; however, this will affect its non-
stick properties.
Removing and putting back the shelf guides
When inserting the shelf guides take care not to damage the enamel.
▸ Swing the shelf guide at the front into the
middle of the cooking space.
▸ Take the shelf guide out of the opening at the
back.
▸ Put back in reverse order.
58