V-ZUG Combair S, Руководство по эксплуатации

Страница: 13 / 60

… Appliance description
13
Using for the first time
Before operating the newly installed appliance for the first time the following steps
should be taken:
A
Remove all transport and packaging materials from the cooking space.
A
If «0.00» and «AUTO» flash alternately in the digital display, simultaneously de-
press the
and buttons and turn the adjusting knob to set the desired
time.
– After about 4 seconds the time is set.
A
Heat the empty appliance (i.e. without the wire shelf, baking tray, etc.) using the
operating mode at the maximum cooking space temperature for around 1
hour. As there is likely to be some smoke and odour given off, we recommend ven-
tilating the room well during this phase.
A
If your appliance comes with hot plates, heat each hot plate individually (without
cookware) at full power for 5 minutes, then switch off and allow to cool down.
Again, ensure that the room is well ventilated throughout.
A
If applicable, see the operating instructions on using a glass ceramic hob for the
first time and its operation, and follow the instructions given.
General operating instructions
The timer, operating time and switch-off time can be selected by pressing the appro-
priate button.
䡲
The symbol for the function selected illuminates in the digital display.
䡲
Turn the adjusting knob to change the setting.
䡲
After about 4 seconds the setting is set.
䡲
Additional settings or changes can be made at any time.
䡲
Press the button to cancel the settings.