Installation instructions
Heat pump dryer
One-family household
1068340-R02
22/05/2019
1068340-R02
6
Free-standing position
If a tumble dryer and a washing machine are positioned side by side, keep a distance of min. 5 mm between the in-
stallation plates and to the walls at the side and min. 45 mm to the back wall. The installation plates for the washing
machine and tumble dryer are the same.
1
45
5
595
510
5
555
D
▸
Fold out spacers
D
in order to keep dis-
tance to the back wall.
▸
Dimensions 45 and 555 only apply if no
plumbing fittings are to be installed be-
hind the appliance.
3. Inserting the ventilation grille
1
≥400 cm²
≥
1710
≥
50
≥400 cm²
≥
860
▸
The heat given off from the rear of the
appliance must be conducted out of the
niche.
▸
Insert 2 ventilation grilles P33002 or a
ventilation cross-section of min. 400 cm
2
.
▸
Ensure there is a supply of fresh air via
the connection opening.
The condensed water hose must not be crushed between the rear of the appliance and the building wall.
4. Levelling
To ensure fault-free operation, the appliance must stand level with all 4 feet firmly on the installation plate and not
wobble.
L
1
▸
Roughly adjust the height of the front and
rear adjuster feet.
▸
Use a spirit level
L
to level the appliance.
▸
Slide the appliance onto the installation
plate.
▸
Finely adjust the front adjuster feet.
▸
The appliance must not wobble!