PHS Group, Western Industrial Estate, Caerphilly, Mid Glamorgan, CF83 1XH Tel: 029 2085 1000 Fax: 029 2086 3288
www.phs.co.uk
SERVICING
Periodic cleaning of the inside of the dryer is recommended to prevent a build-up of dirt and fibres.
With the cover assembly removed a soft brush can be used to dislodge any debris.
An inlet filter is fitted to prevent debris from entering the motor. (Fig.14). This filter can be removed
and replaced by pulling outwards as shown. (Fig.15). Replacement is the reversal of removal.
DESCRIPTION:
High speed low noise warm air hand dryer delivering 800 Watts of drying power. Driven by
a universal brush motor this hand dryer runs on 230 Volts AC electrical supply. An infrared
sensor is used to automatically turn the dryer on and off. This model is intended for use in
commercial, industrial, office and public facility environments. It is particularly suited to
applications where operating noise is a factor.
SPECIFICATION:
Rating:
760W at 230V ac 50Hz
Construction:
ABS
Dimensions (mm):
260x281x152
Weight:
2.80 Kg
IMPORTANT:
This appliance can be used by children aged from 8 years and above and persons
with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved
.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without
supervision.
AIRSTREAM WHISPER
Fig.12
Fig.13
Power Plug
1
2
Fig.14
Fig.15
051291-A
Inlet Filter
